Copyright © 2007 by "Elevators AT Home" · All Rights reserved · E-Mail: firstname.lastname@example.org
Top Landing Bedroom.
Lift currently at lower landing.
Lift is now traveling to top landing.
See how it picks up the floor.
Telecab Residential Two Stop Elevator
The telecab maximizes living space and keeps construction to a minimum by eliminating the need for a hoistway.
500 lbs (227 kg) capacity
Maximum travel of 16’(4,877 mm)
Travel speed 25 feet/min (0,07 m/s) approx.
Cab dimensions: 30" x 46" x 78" (762 x 1,168 x 1,981 mm)
115 VAC relay logic operation (115 VAC up direction and 12 VDC down)
Automatic battery recharging system (115 VAC)
Low voltage controls
2:1 chain hydraulic drive system
Roller guide shoes
Keyed call / send stations
Continuous pressure directional push buttons
Non-skid platform surface
Beige or white acrylic urethane paint finish
¼" (6 mm) plexiglass windows
Front only car access
34" x 59" (864 x 1,499 mm) minimum floor cutout
90" (2,286 mm) minimum overhead at top landing
Three pieces modular cab design and 8 ft modular guide
rail for easy access on site
Time delay for automatic door lock system
Comforms to ASME A18.1 and CSA-B613
Telecab is at Top Landing
Telecab has gone down and put the floor back, you can walk on this area now.
Adjustable top floor presence detector built into the cab
Electro-mechanical door lock and open door sensor
Under panel safety sensor
Emergency stop and alarm
Emergency battery lowering
Fully enclosed drive tower for safety and aesthetics
Pressure relief valve to prevent platform overload
Slack chain safety device
Telephone in cab
Halogen light in cab
Battery operation in up and down direction
32" x 54" (813 x 1,372 mm) cab dimension
Front / back access
Two door concept
Custom cab dimension
Remote hand control
Door mount or side mount car control station
Serving Toronto GTA Ontario
888 582 2687
416 628 0232
519 489 2653
250 483 3352
604 628 9861
Telecab - No Hoistway Elevator